Shop by Price
Shop by Brand

Altair Astro GPCAM v2 Mono AR0130 Mono Guide Imaging Camera

Price:  £189.00 (Inc. 20% VAT)Earn 189 Loyalty Points
Camera Type:  

Check Stock

Model:  ALTAIRGP130M-BASIC
Brand:  Altair

Altair Astro GPCAM v2 Mono AR0130 Mono Guide Imaging Camera
Zoom  Zoom

The Altair GPCAM2 AR0130 Mono camera has the sought after Aptina AR0130 CMOS sensor, with higher sensitivity of about 78% QE.

Very high sensitivity in the far red / NIR region makes the GPCAM2 AR0130 especially good for solar imaging with the Daystar Quark other Hydrogen Alpha filters. This high red sensitivity makes it a great choice for Astro Video or EAA use.

The form factor is ideal for the Daystar Quark. GPCAM fits direct to the Daystar Interference Eliminator and the 1.25" nosepiece screws into the other side, which goes into the Quark. Simple and easy to use. Keep it assembled and just pop it in and go!

Onboard buffering gives USB data transfer speeds significantly higher than the GPCAM1 series, pushing the USB2.0 format to the limit, yet within a stable envelope. This almost completely eliminates dropped frames, corrupted video, and enables faster more consistent frame rates, even with less powerful notebook computers.

The GPCAM2 AR0130 Mono camera can be used for any type of imaging you care to try, such as solar, planetary, lunar “lucky” imaging, and even long exposure deepsky photography. Of course video astronomy is easy with the incredible sensitivity of approx. 78% QE. Time-lapse all-sky imaging (with the optional meteor lens) is fully supported in both AltairCapture and SharpCap software.

The camera has an ST4 auto-guiding port, and can be used to auto-guide with mounts from all the major manufacturers supporting ST4 format, such as iOptron, Celestron and Skywatcher.

You would be hard-pressed to find a more versatile small-format colour astronomy imaging camera with this price and features. And what's more, you get UK/EU based warranty support, plus the Altair Camera Google User Group for all your technical questions - a great place to share tips and techniques to get the best out of your camera.

The GPCAM cameras can be fully controlled in AltairCapture and SharpCap to output uncompressed .AVI and .SER video files for solar system "lucky" imaging, as well as all common still image formats such as .JPEG .PNG .TIF .BMP, to mention just a few. The GPCAM supports 8bit or 12bit output. The 12 bit output mode can be used for deep sky imaging with less frames needing to be stacked and a wider pixel intensity range, or for high dynamic range solar and lunar imaging where bit depth improves tonal range. The AR0130 sensor is extremely sensitive in the NIR region and can be used very effectively with IR Pass filters such as the Altair Planet Killer series, for solar and lunar imaging in mono mode. Simply attach the IR pass filter to the front of the 1.25" nosepiece.

What’s different about the "Purple casing" GPCAM2 platform compared to the blue casing GPCAM1 platform? You’ll notice the GPCAM2 casing is larger than the GPCAM. This is to house larger electronics boards which support trigger mode and frame buffering as well as to increase the surface area for cooling. The GPCAM2 platform supports “Trigger Mode” to make long exposures of over 5 seconds easier to control. With most cameras, in normal video mode, you have to wait for an exposure to complete before the camera will accept, say a command to abort the frame, for say clouds, aircraft, or an alignment issue, like kicking the tripod and so-on, or for routine changes in gain, exposure time, , re-aligning or refocusing on the object. For long exposures, normal video mode is inconvenient, especially for video astronomy and deep-sky imaging, however in Trigger mode, you can stop the camera instantly (even if you are half way through a long 30 second exposure) change the settings, and re-start the camera looping again. The GPCAM2 also has an improved onboard frame buffer to improve data transfer stability at high frame rates (to reduce dropped frames) and to increase compatibility with a wider range of PCs. The improved buffers give a more consistent data transfer rate over USB2.0 and USB3.0 buses on laptops and desktop PCs.

Some interesting features of the AR0130 Mono sensor, aside from increased overall sensitivity compares to the MT9M034 sensor in the GPCAM1, is a very high response in the red region of the spectrum making the camera very sensitive to red light for Hydrogen Alpha solar imaging and in the NIR / IR region which enables the camera to be used with an Altair Planet Killer IR Pass filter for high contrast lunar imaging.

Included in the box:

ALTAIRGP130M-BASIC Package:
Camera body.
2m High-speed USB2.0 A male to B male cable.
1.5m ST4 guide cable.
1.25 inch x 20mm nosepiece with female 1.25" filter thread on the front.
CS-Mount adapter with built-in Clear Optical Window, AR coatings. (Attached at factory but removable).
Plastic dust cap 1.25".

ALTAIRGP130M-FULL Package:
Camera body.
2m High-speed USB2.0 A male to B male cable.
1.5m ST4 guide cable.
1.25 inch x 20mm nosepiece with female 1.25" filter thread on the front.
CS-Mount adapter with built-in Clear Optical Window, AR coatings. (Attached at factory but removable).
CS-Mount adapter with built-in UV-IR Blocking Filter, AR coated. (Removable).
Plastic dust cap 1.25".
2.1mm F1.6 150 degree FOV wide angle Meteor lens and dust caps.
C-Mount 5mm extension adapter for C-Mount lenses requiring 17.5mm back-focus.
Please note: This camera does not come with software in the box. To operate the camera you will need to download the latest camera drivers at cameras.altairastro.com

Sensor & performance specifications:

ALTAIRGP130M: APTINA AR0130 MONO CMOS sensor
Sensor Size: 1/3" (4.8x3.6mm)
Exposure duration shortest/longest:
0.115ms (0.000115 secs) / 800 secs (trigger mode)
0.115ms (0.000115 secs) / 5000ms (5 secs) (video mode)
Bit depth: 8bit & 12bit mode switchable
Pixel size microns: 3.75x3.75 um
Resolution in pixels: 1280x960
Recording System: Still Picture and Video
Region of Interest (ROI) support: Yes, in SharpCap & AltairCapture
Approx. Max frame rates (assuming computer Bus and Hard Drive operating at full bandwidth)*:
8 bit mode:
1280x960 - 27-30fps
640x480 - 55fps ROI mode
320x240 - 104fps ROI mode
12 bit mode - approx 50% of above.
* Based on average user reports. May be revised with more data. Shorter exposure durations yield faster frame rates. An expensive PC does not guarantee a fast frame rate.
Sensor QE / Quantum Efficiency: Approx. 78%
Gain Sensitivity: 6.5V/ lux-sec
Dynamic Range: 82dB
SNR Maximum: 44dB
Readout: Progressive Scan
Shutter: Electronic Rolling Shutter

Software & OS support:
Drivers & software download (Windows only): cameras.altairastro.com
Driver support: PHD2, AltairCapture, SharpCap, (Windows DirectShow)
AltairCapture OS support: Win XP (32bit), Vista/ 7/ 8/ 10 (32 & 64 bit)
USB Port & Cable: USB2.0, 2m cable (USB3.0 port compatible).
ST4 Port & Cable: Standard ST4 Opto-Isolated, 1.5m cable, iOptron, Celestron, Skywatcher SynScan GOTO.

Camera Format:
Cooling: Air-Cooled large surface area camera body.
Camera body length: 70 mm total length including CS-Mount and 5mm extension ring.
Camera body weight: 90 g
AR-coated UV/IR blocking filter wavelength transmission 380-650nm.
AR-coated clear optical window wavelength transmission: 350-1050nm.

Back-focus & Adapter compatibility:
Optical Window is removable to reveal female C-Mount thread
Camera body thread: C/CS-Mount female allows direct attachment of CS-Mount lens or C-Mount lens with 5mm extension.
C-Mount lens adapter: Included, terminates in female thread connecting to camera body.
C-Mount lens compatibility: C-Mount male threaded lens with 17.526 mm back-focus (or flange-distance) requirement.
C-mount lens compatibility: C-Mount male threaded lens with 12.526 mm back-focus (or flange-distance) requirement.
Astro filter thread adapter: Included, 1.25" OD, Female thread
Pushfit Barrel OD: Standard Astro format 1.25” OD eyepiece-barrel
Sensor surface distance from flat end of C-Mount adapter: 17.58 mm
Sensor surface distance from flat end of 20mm 1.25” Astro adapter: 37.58 mm

Operating environment conditions:
Power consumption:
Standby 0.315w
Running 0.875w
Max operating temp: 50 °C
Lowest operating temp: -10 °C
Max operating humidity: 80 % RH
Power source in Volts: 5V DC (via USB cable)
Windows PC Hardware Requirements:
Minimum CPU: Equal to Intel Core2 2.8GHz or Higher
Minimum Memory: 2GB or More
USB port: USB2.0 High-speed Port
Monitor Display: 17" or Larger

Software delivery: Downloaded online at cameras.altairastro.com and saved to hard drive.

Warranty: 2 years manufacturer warranty against defects in materials and worksmanship.

Be the first to Write a Review for this item!

Some items that are showing as in stock are in stock at our holding warehouses, not at the shop. To double check the stock levels at the shop, please contact us on 01909774369 or sales@rothervalleyoptics.co.uk.

The delivery times for most items is 1 - 2 days but again, please double check stock levels on important orders before placing an order via the website.

The delivery costs for courier next day are for mainland UK only. If you live in the Scottish Highlands/Islands, Channel Islands or Northern Ireland, then a shipping surchage will apply. please contact us for prices. Smaller items can still go 1st class via Royal Mail.

Please note that if you are wanting to take advantage of our Saturday and Sunday timed services or next day pre 12 or pre 10:30 services, you MUST check that the stock is here at the shop before placing orders. Also, orders using the Saturday and Sunday services must be placed before 2pm the previous working day. Also, please remember to check that the stock is here at the shop before placing orders. If the stock is not at the shop, we won't be able to ship on any of the timed services. 

Please note International customers will need to contact us for a shipping price prior to ordering via the website. This all depends on the size and weight of the items. Please get in touch with us for any postage costs. Please note we do NOT ship telescopes or heavy items outside of the UK. This is due to massive postage costs and problems regarding returns.

If you have any questions regarding stock levels or delivery, please get in touch.

Rother Valley Optics now have a loyalty point scheme active on the website. As you can see from the products, every item has a point value. Each pound you spend with us, you will receive 1 loyalty point. 1 point is worth 1p. You can accumulate these points as you shop with us, then when you are over £5, you can spend them on the website! Easy as that.

Even if you collect most of your items from our shop, you can still order via the website and select the "shop collection" delivery option. Then you can come to our shop, collect your item and still get your points!

Please note this scheme is online only. Customers who order via the telephone can still be added to the scheme manually. Please ask for more details on this. Before placing orders online, please make sure you are registered with us first otherwise your points won't be allocated.

So happy shopping and if you have any questions about the scheme or any other queries, please get in touch.

Rother Valley Optics

01909774369
sales@rothervalleyoptics.co.uk

Finance is now available on most products above £250! We offer 12, 24, 36 and 48 months with a fixed 15.9% typical APR. Please note this can't be done through the website at this moment in time. You will need to email us or drop into the shop to sort out finance. As long as the item is above £250, finance is generally available!

Please note some items are NOT eligible for finance. Please contact us for eligibility first. 

Please get in touch with us today to find out if you're applicable.

You must be over 18 years to apply, live in the UK, have a valid UK bank account and not be bankrupt. Your credit file will be searched on application to see if you are eligible.

Rother Valley Optics Ltd is registered in England and Wales 04762707. Registered Office: 21 Station Road, Kiveton Park, Rotherham, S26 6QP. Rother Valley Optics Ltd acts as a credit broker only. Rother Valley Optics Ltd are authorised and regulated by the Financial Conducts Authority. Credit provided subject to age and status..

If you have any questions about this, simply give us a ring or drop into the shop for a chat.

- - - Rother Valley Optics Ltd

01909 774 369
sales@rothervalleyoptics.co.uk

Customers who bought this item also bought: