Rother Valley Optics Swing Arm Digiscoping Bracket: £35.73

Allows the camera to be swung away from the lens

This new useful digiscoping adaptor from Rother Valley Optics clamps onto almost any spotting scope or telescope to allow afocal photography.

All you need to do is clamp the bracket around your eyepiece, then attach your digital camera to the connection on the swing arm. Get your adjustments set so your camera is in the center of the field of view, then you are ready to take pictures!

You can even get the camera set up first, then swing it out the way to use your scope visually, then when you see the perfect picture opportunity, you can swing your camera back in ready to shoot in literally seconds.

All metal construction means it is a very rigid adaptor and will take most compact digital cameras and some lighter bright cameras. Please note SLR cameras are not intended to be used on this bracket.

Unlike other swing arm digiscoping brackets, this one features 3 point contact around the eyepiece. This means a better grip, sturdier connection and a more versatile adaptor. This bracket comes with 6 pads. 3 smaller ones for larger eyepieces and 3 longer ones for smaller eyepieces.

Start digiscoping today with this inexpensive, very useful adaptor!

Measurements:

65mm internal diameter.
42mm fully wound in diameter with smaller pads.
26mm fully wound in diameter with larger pads.
135mm maximum length of camera used with lens out.

Please note that stock levels do fluctuate so please call or email to check today's stock before placing your order.

Package Deals