All Products

Fits: Meade 10” (25 cm) f/10 SCT versions with three screws on the secondary housing (2120, LX10, LX50, LX90, LX100, LX200, others)
Knobs: Black plastic, 16 mm (5/8”) diameter
Threads: Black anodized aluminum alloy

Fits: Meade 10” (25 cm) f/10 SCT versions with six screws on the secondary housing (LX90, LX200, LX200ACF, LX200R, others). The inner screws are for collimation.
Knobs: Black plastic, 16 mm (5/8”) diameter
Threads: Black anodized aluminum alloy

Fits: Meade 12” (30 cm) f/10 SCT versions with three screws or four screws on the secondary housing (LX200, others)
Knobs: Black plastic, 16 mm (5/8”) diameter
Threads: Black anodized aluminum alloy

Fits: Meade 14” (36 cm) f/10 SCT versions with 6-screw secondary and exposed factory collimation screws (Includes LX200ACF)

Knobs: Black plastic, 16 mm (5/8”) diameter
Threads: Black anodized aluminum alloy

An optional stainless steel tool available to allow the worm shaft bearing retaining rings to be more easily removed. This tool is to accompany the NEQ6 Pro belt modification kit.

Finder shoe from ZWO for your finder scope and guide scope that can match your ASIAIR PRO and ZWO holder ring.

Made from light weight breathable black fabric.
Elastic bands ensure a good fit. Helps to stops dust getting onto your secondary mirror.

This very handy accessory converts M48 female into T-2 female thread, it has a male M48 thread (which is also the same thread as Baaders 2" filters) and has a female T-2 thread, this means that it can be screwed onto a T-2 accessory and then offer an M48 thread instead.

M36.4 is standard of Vixen telescopes.
Telescope side external thread 36.4mm.
Focuser side T-2 external thread (direct T-2 photo thread for Vixen, NexStar 4, Meade etc...).

These silica gel beads are perfect for protecting your scope or optical accessories from damaging moisture.

Nicely made extension tubes suitable for use with a wide variety of T-threaded equipment. Available in 7.5mm, 15mm & 40mm lenghts.

As spacers they are useful for increasing image scale and magnification.

All the BRESSER Plössl eyepieces provide sharp and high-contrast images because of the 4-lens design. All lenses have fully-multicoated surfaces which prevents reflections efficiently.

The Smartphone Adapter DX Kit is a great first step into the world of astroimaging or digiscoping. You get everything you need to capture sharp, detailed images and video.

This adapter allows you to mount your binocular (porro or roof) to a tripod for added stability and convenience.

Celestron's high quality SCT to 2" SCT adaptor provides a solid connection between a Schmidt-Cassegrain or Maksutov-Cassegrain telescope and 2” accessories (e.g 2" diagonal).

Add one of Celestron’s planetary cameras to your Ultima Duo eyepiece, including Skyris, NexImage Burst, and NexImage 5 imagers.