Home > Telescope Accessories > Astro Imaging > Cameras
Model: ALTAIRGPCAMAR0130C-FULLBrand: Altair
Generally In Stock, Please Confirm Before Ordering
The GPCAMAR0130C is an all-in-one General Purpose astronomy camera with a 1.2mpx COLOUR CMOS AR0130 sensor. Now, you can enjoy full HD imaging at lower cost than ever before, and with all the quality and features you'd expect - driven by maturing CMOS technology. About the size of a small eyepiece, and weighing about 70 grams, the GP-CAM packs many features into a very small form factor. Special voltage regulation hardware and on-board noise reduction circuitry allow the GPCAM to outperform CMOS cameras using older electronics boards, so the GPCAM can even be used for longer deepsky exposures. Japanese SMD boards and US made components give better reliability than older style cameras on the market. The GP-CAM let's you image the Moon, Sun and Planets, and even short exposure deep-sky imaging. What's more - an ST4 auto-guiding port is included! Of course for autoguiding with the Altair Miniguider and Starwave optical tube range, the GPCAM camera is ideal! You get light weight direct fitment to your Miniguider OTA - just like a 1.25" eyepiece. No hassle, no fuss, no adapters required. The GPCAMAR0130C is ideal for imaging the planets without requiring colour RGB filters or a UV/IR blocking filter (this comes with the camera and can be removed if desired). Full ROI (Region Of Interest) support is included, allowing you to increase the frame rate to very high speeds by focusing on planets or solar features, and with the free downloadable AltairCapture software, you can even take darkframes in seconds. The GPCAMAR0130C colour sensor: Specially selected 1/3" Aptina AR0130C HD CMOS sensor with 3.75 micron pixels, high sensitivity and fast frame rate, as well as long time exposure capability. Special DR-Pix™ Dynamic Response technology provides high colour performance in a very low light environment - a class leader for maintaining colour fidelity and low noise in low light situations, making it perfect for planetary imaging, video astronomy and even short deepsky exposures. Quantum efficiency (QE) peaks at about 68% in green, which is high for a colour sensor. The sensor: Specially selected 1/3" Aptina MT9M034 HD CMOS sensor with 3.75 micron pixels, high sensitivity and fast frame rate, as well as long time exposure capability. The mono CMOS sensor has a Peak QE rating of 74% outperforming many more expensive CCD sensors, and is optimised for performance in a very low light environment, making it perfect for solar, planetary imaging, video astronomy, and deepsky imaging. The peak Quantum Efficiency (QE) of the Aptina MT9M034 Mono sensor is appox. 75% in green light, making it one of the most sensitive 1/3" CMOS sensors available at this price. The electronics: Altair Astro GPCAM PCB boards feature ESD protection (Electro-Static Discharge). All the electronic components on the PCB board are of high quality and are imported from the USA and Japan. These quality components give Altair cameras more stable performance and a longer lifespan than most other cameras, hence the two year warranty. Non-essential circuitry is shut down during long exposures resulting in even less noise and a stronger signal. Special voltage regulation hardware and on-board noise reduction circuitry allow the GPCAM to outperform CMOS cameras using older electronics boards, so the GPCAM can even be used for longer deepsky exposures. Japanese SMD boards and US made components give better reliability than older style cameras on the market. The casing: The camera casing is CNC machined on a CNC lathe will multi axis milling capabilities, accurate to thousands of an inch, therefore component fit and alignment are very accurate. The case features an internal heat transfer structure designed to conduct heat away from the electronics, and directly from the sensor to be dissipated through the outer housing quickly and efficiently resulting in a cooler sensor and lower noise in long exposure mode. The GPCAM is attractive for auto guiding because it has a slim casing which fits between OAG and Filter wheel or Guidescope and main optical tube. The ST4 & USB cables protrude from the back of the camera for more clearance. Some cameras do not have this slim casing, and some even have a large wide body with cables protruding from the sides at 90 degrees to the optical axis, or USB/ST4 cables which cannot be combined in a sheath because they are too far apart. This means they are difficult or impossible to use with an OAG and most finder/guiders with cable pull and clearance issues. Neat cable management and clearance are more reasons to choose the GPCAM. The optical window: The sensor is protected by a double-side Anti Reflection (AR) coated optical window, The colour camera optical window blocks UV & IR light enabling direct use with telescopes, barlow and reducer lenses. The mono camera optical window is clear to allow the user full control over what type of light they wish to pass for example narrowband imaging, Ha solar imaging, RGB planetary imaging or even UV and IR planetary imaging (reveals extreme detail). Connecting your GPCAM to your PC and mount: A built-in ST4 auto guider port is included on the rear face with 2m ST4 cable for easy connection between auto guider directly to your GOTO mount. The camera is powered through the included 2m USB 2.0 cable, which is aligned with the USB cable so you can combine them in a sheath or tie them together with cable ties to reduce cable-clutter. Connecting your GPCAM to telescopes with filters, and C or CS-Mount lenses: The CNC machined aluminum housing has a standard 1.25 inch OD barrel to fit to almost any telescope focuser including the Altair Miniguider 60, 80, and Starwave 50mm guide scopes. A standard 1.25 inch eyepiece filter can be installed on the end of the 1.25" barrel, such as a light pollution or other special filter. The 1.25" barrel can be removed to reveal a standard CS/C-mount thread compatible with most industrial and surveillance lenses, or microscope eyepiece adapters. If you want to image in exotic wavelengths like UV or IR you can use the clear optical window which comes with the MONO camera. For use with a lens or a telescope with lenses in the optical path, you just attach UV/IR Blocking optical window (already in place on the colour camera and included with the mono camera. The GPCAM is a very flexible system compared other cameras. It allows you to swap the optical window instantly and easily whilst avoiding touching the filter, a feature not possible with some other cameras. A 5mm CS to C mount converter ring is also included. This allows you to attach CS-mount as well as C-mount lenses, so you have a huge range of lenses available to experiment with, unlike other cameras which only allow the use of CS lenses. See the GPCAM system chart for more info. The Meteor lens: You can use the 150 degree FOV F1.6 Meteor lens for wide angle imaging of the sky to capture meteorites and aurora displays - or just create a video of the night sky as the earth rotates. You can even make timelapse daytime videos to capture cloud formations or capture any activity with standard high speed video mode. This little lens is sharp too, and perfectly capable of macro photography and video. Your imagination is the limit! Software compatibility:Note: This camera does not come with software in the box. You will need to download GP-CAM drivers and software to make it work. DO NOT PLUG IN CAMERA UNTIL YOU HAVE INSTALLED THE DRIVERS.Fully supported by the latest version of Sharpcap for still and video capture, and full control of your camera.AltairCapture astrophotography software can also be downloaded to support image stacking, video preview, video recording, snapshot image capture, and raw data output. AltairCapture software also allows full control of the camera frame rate, exposure time in milliseconds, colour balance, gain, B&W / colour mode and ROI (Region Of Interest).A special version of PHD2 can also be downloaded here.NEW GPCAM ASCOM drivers now available for testing on Altair Astro Google Group.Included in the box:Camera body.2m High-speed USB2.0 A male to B male cable.1.5m ST4 guide cable.1.25 inch x 20mm nosepiece with 1.25" filter thread.C-Mount 5mm extension adapter for C-Mount lenses requiring 17.5mm backfocus.Extra CS-Mount adapter with built-in clear AR coated optical window (for UV or IR imaging of planets with UV or IR pass filters).CS-Mount adapter with built-in UV-IR Blocking Filter AR coated (for imaging with lenses or refractors).2.1mm F1.6 150 degree FOV wide angle Meteor lens and dust cap.Plastic dust cap 1.25".Note: This camera does not come with software in the box. You will need to download the latest GP-CAM drivers. Sensor & performance specifications: (Where they differ, Colour and Mono camera specs are included for comparison). GPCAMAR0130C: Aptina AR0130 Colour CMOS sensorSensor Size: 1/3" diagonal (4.8x3.6mm)Exposure duration shortest/longest: 0.4 ms (0.0004 secs) / 800 secsBit depth: 8bit & 12bit mode switchablePixel size microns: 3.75x3.75 umResolution in pixels: 1280x960Recording System: Still Picture and VideoRegion Of Interest (ROI) support: Yes, user selectable via driverApprox. Max frame rates (assuming computer Bus operating at full bandwidth):1280x960 30FPS, 1024x768 40FPS, 800x600 70FPS, 640x480 100FPS, 20x240 200FPSSensor QE / Quantum Efficiency:GPCAMAR0130C: Approx. 68% peak in green lightGain Sensitivity:GPCAMAR0130C: 5.5v/lux-secDynamic Range:GPCAMAR0130C: >85.3dBSNR Maximum:GPCAMAR0130C: 44dBReadout: Progressive ScanShutter: Electronic Rolling Shutter Spectral Range & Colour Management - GPCAMAR0130C colour camera: 350-1050nm with double sided AR Coated window (removable)White balance: ROI White Balance/ Manual Temp-Tint AdjustmentColour Rendering Technique: Ultra Fine Colour Engine Software & OS support:Drivers & software download (Windows only): cameras.altairastro.comDriver support: PHD2, AltairCapture, SharpCap, (Windows DirectShow)AltairCapture OS support: Win XP/ Vista/ 7/ 8/ 10 (32 & 64 bit)USB Port & Cable: 2.0 USB, 2m cableST4 Port & Cable: Standard ST4 Opto-Isolated, 1.5m cable, iOptron, Celestron, Skywatcher SynScan GOTO. Physical characteristics:Cooling: High Performance Cooling Chassis uses telescope focuser as heat-sinkCamera body length: 63mm total length including C-Mount and 1.25" Astro barrelWeight grams: 70 g (camera net weight)Optical window built into CS Mount Adapter before 1.25" front barrel - can be removed: Mono Camera: AR-coated clear 350-1050nm wavelength transmission Colour Camera: AR-coated UV/IR blocking filter 380-650nm wavelength transmission Back-focus & Adapter compatibility:Optical Window is removable to reveal female C-Mount thread.Camera body: OD 1.25" stepped barrelCamera body thread: C/CS-Mount female allows direct attachment of CS-Mount lens or C-Mount lens with 5mm extension.C-mount lens adapter: Included, terminates in female thread.C-mount lens compatibility: C-Mount male threaded lens with 17.526 mm back-focus (or flange-distance) requirement.C-mount lens compatibility: C-Mount male threaded lens with 12.526 mm back-focus (or flange-distance) requirement.Astro filter thread adapter: Included, 1.25" OD, Female threadPushfit Barrel OD: Standard Astro format 1.25" OD eyepiece-barrelSensor surface distance from flat end of C-mount adapter: 17.58 mmSensor surface distance from flat end of 20mm 1.25” Astro adapter: 37.58 mm Operating environment conditions:Power consumption: 0.8 W (Ave. Camera running)Max operating temp: 50 °CLowest operating temp: -10 °CMax operating humidity: 80 % RHPower source in Volts: 5V DC (via USB cable) Windows PC Hardware Requirements:Minimum CPU: Equal to Intel Core2 2.8GHz or HigherMinimum Memory: 2GB or MoreUSB port: USB2.0 High-speed PortMonitor Display: 17" or LargerSoftware delivery: Downloaded online and saved to hard drive. Packaging:Protective rubber end-capPadded cardboard storage box with durable foam inserts Optional Accessories: Altair Astro Premium 1.25" CLS-CCD Filter with UV/IR Block & AR Coating (Code: F125CLSCCD) for imaging emission nebulae in light polluted urban enivonments.Altair Astro Premium Planet-Killer 685nm IR Pass Filter with AR Coating (Code: F125IRP685CCD) for the ultimate sharpness in lunar and planetary imaging (best for mono camera but does work with colour camera) Warranty: 2 years manufacturer warranty against defects in materials and worksmanship.
Be the first to Write a Review for this item!
Some items that are showing as in stock are in stock at our holding warehouses, not at the shop. To double check the stock levels at the shop, please contact us on 01909774369 or email@example.com.
The delivery times for most items is 1 - 2 days but again, please double check stock levels on important orders before placing an order via the website.
The delivery costs for courier next day are for mainland UK only. If you live in the Scottish Highlands/Islands, Channel Islands or Northern Ireland, then a shipping surchage will apply. please contact us for prices. Smaller items can still go 1st class via Royal Mail.
Please note that if you are wanting to take advantage of our Saturday and Sunday timed services or next day pre 12 or pre 10:30 services, you MUST check that the stock is here at the shop before placing orders. Also, orders using the Saturday and Sunday services must be placed before 2pm the previous working day. Also, please remember to check that the stock is here at the shop before placing orders. If the stock is not at the shop, we won't be able to ship on any of the timed services.
Please note International customers will need to contact us for a shipping price prior to ordering via the website. This all depends on the size and weight of the items. Please get in touch with us for any postage costs. Please note we do NOT ship telescopes or heavy items outside of the UK. This is due to massive postage costs and problems regarding returns.
If you have any questions regarding stock levels or delivery, please get in touch.
Rother Valley Optics now have a loyalty point scheme active on the website. As you can see from the products, every item has a point value. Each pound you spend with us, you will receive 1 loyalty point. 1 point is worth 1p. You can accumulate these points as you shop with us, then when you are over £5, you can spend them on the website! Easy as that.
Even if you collect most of your items from our shop, you can still order via the website and select the "shop collection" delivery option. Then you can come to our shop, collect your item and still get your points!
Please note this scheme is online only. Customers who order via the telephone can still be added to the scheme manually. Please ask for more details on this. Before placing orders online, please make sure you are registered with us first otherwise your points won't be allocated.
So happy shopping and if you have any questions about the scheme or any other queries, please get in touch.
Rother Valley Optics
Finance is now available on most products above £250! We offer 12, 24, 36 and 48 months with a fixed 15.9% typical APR. Please note this can't be done through the website at this moment in time. You will need to email us or drop into the shop to sort out finance. As long as the item is above £250, finance is generally available!
Please note some items are NOT eligible for finance. Please contact us for eligibility first.
Please get in touch with us today to find out if you're applicable.
You must be over 18 years to apply, live in the UK, have a valid UK bank account and not be bankrupt. Your credit file will be searched on application to see if you are eligible.
Rother Valley Optics Ltd is registered in England and Wales 04762707. Registered Office: 21 Station Road, Kiveton Park, Rotherham, S26 6QP. Rother Valley Optics Ltd acts as a credit broker only. Rother Valley Optics Ltd are authorised and regulated by the Financial Conducts Authority. Credit provided subject to age and status..
If you have any questions about this, simply give us a ring or drop into the shop for a chat.
- - - Rother Valley Optics Ltd
01909 774 firstname.lastname@example.org
Customers who bought this item also bought:
*NameYour name*Contact InformationPlease enter your email address or telephone number here so we can contact you about the price match*URL of competitors websitePlease enter a link here to the item where you have seen it cheaperAdditional InformationAny additional information can be inputted here*Please add the two numbersSubmitSubmit