Home > Cameras > View All Cameras
Model: AA183MPROBrand: Altair
Generally In Stock, Please Confirm Before Ordering
The IMX183 is one of the most sensitive Back Side Illuminated BSI sensors available, with very low read noise, suitable for both deep sky and solar system imaging with ROI.
The PRO Version has the following features: 4GB DDR3 RAM Memory Buffer for better performanceFan-cooled on-sensor internal heatsink, powered though USB cable, so NO separate 12v power supply required.Temperature sensor, with data available in realtimeROI (Region of Interest) for cropped higher speed solar, lunar and planetary imaging.4K Mode (cropped).Binning.Amp glow reduction.SPECIAL OFFER! FREE 1 YEAR SharpCap PRO License! Includes ultra-accurate polar alignment assist, deepsky CMOS exposure time optimisation assist, live stacking for EAA/Video astronomy, live darkframe and flat frame subtration.Click here for more SC PRO features. Just download the latest SharpCap, connect your camera, register when the screen pops up and sign up for your free license. Download SharpCap 3.0+ now to take advantage of this special offer.Easier than a DSLR and no "astro modding" required: Hypercam is much easier to use and focus than a DSLR, thanks to the live preview mode which shows uncompressed video at full resolution. You can see a tiny star-point clearly in real-time, because there is no video compression like with a DSLR video stream. Unlike a DSLR, there's no need to modify your camera to capture detail in red hydrogen wavelengths, because it has no red blocking filter in the way. There are no clumsy power connectors which drop out easily, no firmware to fight with your software, no mirror to lock up, and a "true" uncompressed RAW mode output. You get exactly what this Sony sensor "sees" from without alterations.
Low read noise. The Sony IMX183 CMOS sensor has very low read noise, wide dynamic range, and high sensitivity. The IMX183 ExmorR rated Back Illuminated Sensor has high-sensitivty, low dark current, no smear, and excellent anti-blooming charateristics. BSI technology moves the sensor circuitry behind the pixel, so unlike conventional sensors the light path is not blocked, resulting in higher quantum efficiency than a CCD sensor. Great for refractors. With a pixel size of 2.4um, and an active imaging area of 13 x 9mm, the Hypercam IMX183C performs extremely well an Altair refractor, with or without a focal reducer.4GB DDR3 RAM: The Hypercam PRO series also has an unprecedented 4GB on-board frame buffer to improve data transfer stability at high frame rates (to reduce dropped frames) and to increase compatibility with a wider range of PCs. The improved buffers give a more consistent data transfer rate over USB2.0 and USB3.0 allowing longer imaging sequences with small notebooks, stick PCs, or mini-PCs.
Low read noise BSI sensor. The Sony IMX183 CMOS sensor is ExmorR rated, and Back Illuminated (BSI). BSI technology moves the sensor circuitry behind the pixel, so unlike conventional sensors the light path is not blocked, resulting in higher quantum efficiency than a traditional CCD sensor. Read noise is low, and there is no smear or “blooming” on bright stars.
Try deep-sky "lucky" imaging. The low read noise let’s you stack shorter exposures to take advantage of the low read noise, reducing atmospheric aberrations and tracking errors or wind vibration. The more frames you stack, the smoother the image becomes, and the higher the cumulative dynamic range. In this way, long cumulative exposure times of many hours can be achieved with modest equipment. The result is a smoother, sharper image with more detail.
Video Astronomy/EAA Friendly. The Hypercam IMX183 sensor is not only desirable for Deepsky Imaging - it's also great for Video Astronomy or "EAA" Electronically Assisted Astronomy. All thanks to the 20mp resolution, high sensitivity, and amp glow reduction technology. What's more you can use the Live Stacking features in the AltairCapture software or SharpCap PRO. All-sky time-lapse imaging or video is easy with a DSLR lens and optional Hypercam Lens Adapters (product code: CLA-EOS or CLA-NIKON).
Here's a video showing the camera operating in deepsky video mode at around 1-3 sec exposure in realtime:
To sum it up, the most desirable features of the Hypercam IMX183 camera are: - 20mp resolution SONY Exmor R Back Side Illuminated IMX183 CMOS sensor - 5440 x 3648 active pixels in a 13x9mm 16mm diagonal array (16.05mm x 12.61mm physical sensor size).- Extremely low read noise enabling deepsky lucky imaging and very smooth image quality.- Amp glow reduction technology onboard reduces amp glow, reduces noise, and increases contrast.- High Dynamic Range with 12 bit ADC to 16bit output .FITS files in RAW mode, for beautiful deepsky images.- Up to 17.5 Frames per second video in full 20mp resolution. (You will need a computer with high USB bandwidth to achieve these speeds, preferably with Intel or Via hardware USB controller on the motherboard). More technical stuff: Pure RAW mode output for better post processing: The Hypercam sensor ADC can 12bit RAW files, which are stretched to 16 bit. In RAW mode analog (on-sensor) gain is used for ultra low read-noise images. Because the output is completely "RAW" in analog mode, there is no partial "downstream digitial" processing like with a DSLR or other cheaper Chinese cameras of similar design, resulting in true RAW mode for the best deepsky performance. True RAW mode allows greater flexibility and consistency in processing large stacks of frames for deepsky "lucky" imaging, where the camera's low read noise can be taken advantage of. Either .FITS image or .SER video files are captured in their purest form for later processing in your software of choice. Of course for Video Astronomy / EAA use, you can select RGB Mode and capture .AVI files, or just view the screen with full access to white balance, gamma, contrast and histogram controls, just like any other camera. USB3.0 speed and USB2.0 reliability: USB3.0 and on-board memory buffering give much faster transfer speeds than USB2.0 cameras, however, if like most imagers, you prefer to use longer and more flexible USB2.0 cables for better tracking and reliability with a USB2.0 hub, no problem! The Hypercam is completely compatible with USB2.0 protocol. Just install the software, and off you go! QUALITY software and drivers included:AltairCapture: Unlike cheaper cameras, Altair Astro has spent considerable time improving the extensively featured and intuitive AltairCapture software, which can be downloaded from cameras.altairastro.com. AltairCapture is a stable 64 bit Windows application, which allows full control of the camera in high speed video or still mode. It includes extensive automation features, and supports all the major file formats useful for astro imaging and professional scientific imaging in 16bit, 12bit or 8bit mode. Furthermore, the popular PHD Guiding, SharpCap and Firecapture are also natively supported. ASCOM drivers are also available for download at cameras.altairastro.com where you can also get regular driver updates. The installation process is very simple, and unlike with cheaper cameras, there is no need to waste time tweaking .DLL files to make your camera perform as expected.SharpCap PRO: Altair Astro have worked closely with SharpCap developer Robin Glover since 2015, to fully integrate Altair cameras with SharpCap at a basic level. Now, Sharpcap PRO enables even more features with this camera, such as software driven polar alignment (more accurate than any other method), live flat frame subtraction and live darkframe subtraction. The fast, accurate polar alignment feature in SharpCap PRO is a life-saver for imaging, minimising setup time. Fan cooling: The Hypercam is cooled with and internal low vibration fan. The fan can be switched on or off and the speed controlled in AltairCapture and SharpCap. Cool air is drawn in through the vents at the side of the casing, over a large internal heat-sink. The heat-sink is connected directly with the sensor board just like a computer CPU. The free flow of air through the casing cools not only the sensor, but all the internal electronics boards. Cooling is especially desirable for long exposure imaging to reduce thermal noise. Some camera casings get uncomfortably hot during a solar imaging session, and the sensor can reach around 60 or even 70 degrees. This can cause the electronics to become glitchy and unreliable. The Hypercam is designed for consistent, reliable solar imaging with a solar filter and diagonal or Altair Solar Wedge. With the fan running, the Hypercam casing, electronics and memory will always remain cool, protecting the electronics even on the hottest days. Support & warranty: Altair delivers proper on-shore English-speaking UK/EU support with a 2 year manufacturer warranty against defects in materials and workmanship. New users should visit Altair Camera Google User Group where you can get answers to technical questions. The group is also a great place to share tips and techniques, to get the best out of your camera. The AltairCapture software interface supports most European languages including English, German, French, Indonesian, Japanese, Korean, Polish, Russian, Chinese, Spanish, Thai, and Turkish. File formats: The camera can be fully controlled in AltairCapture and SharpCap to output uncompressed .AVI and .SER video files for solar system imaging, as well as all common still image formats such as .JPEG .PNG .TIFF .BMP, and .FITS (for deepsky imaging) to mention just a few. The Hypercam supports 8bit or 12bit output. The 12 bit output mode can be used for deep sky imaging with less frames needing to be stacked and a wider pixel intensity range. The sensor is extremely sensitive and a good candidate for video astronomy, especially with small refractors. Find out more about bit depth here. Find out more about video & file formats here. The Hypercam platform: The Hypercam platform supports “Trigger Mode” to make long exposures of over 5 seconds easier to control. With most cameras, in normal video mode, you have to wait for an exposure to complete before the camera will accept, say a command to abort the frame, for say clouds, aircraft, or an alignment issue, like kicking the tripod and so-on, changes in gain, exposure time, or re-aligning or refocusing. For long exposures, normal video mode is inconvenient, especially for video astronomy and deep-sky imaging, however in Trigger Mode, you can stop the camera instantly (even if you are half way through a long exposure) change the settings, and re-start the camera. The Hypercam also has an improved on-board frame buffer to improve data transfer stability at high frame rates (to reduce dropped frames) and to increase compatibility with a wider range of PCs. The improved buffers give a more consistent data transfer rate over USB2.0 and USB3.0 buses on laptops and desktop PCs. Included in the box:Camera body with internal cooling fan, heat-sink, and front female M42x0.75mm T-Thread interface (12.5mm backfocus).1.8m High-speed USB3.0 cable.2" OD Nosepiece with standard 2" M48x0.75mm filter thread on the front. (code ALTAIRH-2IN).C-Mount insert ring (for C-Mount lenses requiring 12.5mm back-focus) is included.Built-in UV-IR Blocking Filter, AR coatings. (Removable for sensor cleaning).Plastic screw-on dust cap.Allen key for removing the C-Thread insert.Note: This camera does not come with software in the box. To operate the camera you will need to download the latest camera drivers at cameras.altairastro.com (opens new window) Sensor & performance specifications:ALTAIRH183M: SONY Exmor R BSI IMX183 Mono CMOS sensorSensor Size: 1" diagonal (15.86mm)Exposure duration shortest/longest: 0.264 ms (0.000264 secs) / 5 secs (Video Mode)0.264 ms (0.000264 secs) / 1000 secs (Trigger Mode)Bit depth: 8bit & 12bit mode switchablePixel size microns: 2.4 x 2.4 umResolution in pixels: 5440x3648Recording System: Still Picture and VideoRegion of Interest (ROI) support: UnavailableApprox. Max frame rates (assuming computer Bus operating at full bandwidth)*:8bit mode:5440x3648 17.5FPS2736x1824 50FPS1824x1216 60FPS12bit mode:Approx. 60% ~98% of above * Based on average user reports. May be revised as we get more data. The shorter the exposure duration, the faster the frame rate. An expensive PC does not guarantee a fast frame rate because PC bus and main board architecture vary. Sensor QE / Quantum Efficiency: TBCReadout: Progressive ScanShutter: Electronic Rolling Shutter Software & OS support:Drivers & AltairCapture software download (Windows only): cameras.altairastro.com (opens new window). Driver support: PHD2, AltairCapture, SharpCapAltairCapture OS support: Win 8/ 10 (32 & 64 bit)NOTE: Windows 10 is recommended for best performance, with 2013 or later machine USB host controller v1.0 or later.ASCOM fully supported with drivers downloadable at cameras.altairastro.com (opens new window). SharpCap and APT (3rd party applications) are also fully supported with native drivers for seamless camera control.USB Port & Cable: 3.0 USB Cable, 1.8m cable (USB2.0 also supported). Camera Format:Cooling: High Performance Electronic Fan-cooling System with Heat-sink connected to sensor via cold-fingerCamera body length: 80 mmWeight grams: 320 g (camera net weight)Optical window can be removed:Mono Camera: AR-coated clear protect window 350-1050nm wavelength transmissionColour Camera: AR-coated UV/IR blocking filter 400-700nm wavelength Transmission Back-focus & Adapter compatibility:Optical Window is removable for cleaning.Camera body: OD 65mmCamera body thread: M42x0.75 T2 Thread to CS -Mount insert allows direct attachment of CS-Mount lens (or C-Mount lens with optional 5mm extension).C-mount lens adapter 5mm extension: OptionalC-mount lens compatibility: C-Mount male threaded lens with 12.5mm back-focus (or flange-distance) requirement.CS-mount lens compatibility: C-Mount male threaded lens with 12.5mm back-focus (or flange-distance) requirement.Astro filter thread adapter: Included, 1.25" OD and 2” OD (optional), Female threadSensor surface distance from flat end of CS-mount adapter: 12.5 mmSensor surface distance from flat end of 1.25" / M42 Astro adapter: 37 mm Operating environment conditions:Power consumption: 0.905 W (standby); 1.68 W (running with Fan off); 2.525 (running with Fan on);Max operating temp: 50 °CLowest operating temp: -10 °CMax operating humidity: 80 % RHPower source in Volts: 5V DC (via USB cable) Windows PC Hardware Requirements:Minimum CPU: Equal to Intel Core2 2.8GHz or HigherMinimum Memory: 2GB or MoreUSB port: USB2.0 High-speed Port or USB3.0 High-speed Port Monitor Display: 17" or LargerSoftware delivery: Downloaded online and saved to hard drive. Packaging:Protective silicon rubber end-cap for camera CS-thread.Plastic end cap for 1.25" nosepiece.Padded cardboard storage box with durable foam inserts Optional Accessories:Clear AR coated optical window; Software delivery: Downloaded online at cameras.altairastro.com and saved to hard drive.Quick Start & AltairCapture instructions: Downloaded online at cameras.altairastro.com and saved to hard drive. Warranty: 2 years manufacturer warranty against defects in materials and workmanship. Return to point of purchase. Recommended Accessories: Altair Astro Premium 2" CLS-CCD Filter w AR Coating (Code: F200CLSCCD) for imaging emission nebulae in light polluted urban environments.Skytech LPRO-MAX 2" CCD Filter with AR Coating (Code: F200-LPROMAXCCD) for imaging all objects in moderate light pollution with better colour balance.Altair Hypercam DSLR Lens Adapter for Canon EOS or Nikon lenses. (Codes: CLA-EOS and CLA-NIK).Software & OS support:Drivers & AltairCapture software download (Windows only): cameras.altairastro.com (opens new window). Driver support: PHD2, AltairCapture, SharpCapAltairCapture OS support: Win 8/ 10 (32 & 64 bit)NOTE: Windows 10 is recommended for best performance, with 2013 or later machine USB host controller v1.0 or later.ASCOM fully supported with drivers downloadable at cameras.altairastro.com (opens new window). SharpCap and APT (3rd party applications) are also fully supported with native drivers for seamless camera control.USB Port & Cable: 3.0 USB Cable, 1.8m cable (USB2.0 also supported).
Be the first to Write a Review for this item!
Some items that are showing as in stock are in stock at our holding warehouses, not at the shop. To double check the stock levels at the shop, please contact us on 01909774369 or firstname.lastname@example.org.
The delivery times for most items is 1 - 2 days but again, please double check stock levels on important orders before placing an order via the website.
The delivery costs for courier next day are for mainland UK only. If you live in the Scottish Highlands/Islands, Channel Islands or Northern Ireland, then a shipping surchage will apply. please contact us for prices. Smaller items can still go 1st class via Royal Mail.
Please note that if you are wanting to take advantage of our Saturday and Sunday timed services or next day pre 12 or pre 10:30 services, you MUST check that the stock is here at the shop before placing orders. Also, orders using the Saturday and Sunday services must be placed before 2pm the previous working day. Also, please remember to check that the stock is here at the shop before placing orders. If the stock is not at the shop, we won't be able to ship on any of the timed services.
Please note International customers will need to contact us for a shipping price prior to ordering via the website. This all depends on the size and weight of the items. Please get in touch with us for any postage costs. Please note we do NOT ship telescopes or heavy items outside of the UK. This is due to massive postage costs and problems regarding returns.
If you have any questions regarding stock levels or delivery, please get in touch.
Rother Valley Optics now have a loyalty point scheme active on the website. As you can see from the products, every item has a point value. Each pound you spend with us, you will receive 1 loyalty point. 1 point is worth 1p. You can accumulate these points as you shop with us, then when you are over £5, you can spend them on the website! Easy as that.
Even if you collect most of your items from our shop, you can still order via the website and select the "shop collection" delivery option. Then you can come to our shop, collect your item and still get your points!
Please note this scheme is online only. Customers who order via the telephone can still be added to the scheme manually. Please ask for more details on this. Before placing orders online, please make sure you are registered with us first otherwise your points won't be allocated.
So happy shopping and if you have any questions about the scheme or any other queries, please get in touch.
Rother Valley Optics
Finance is now available on most products above £250! We offer 12, 24, 36 and 48 months with a fixed 15.9% typical APR. Please note this can't be done through the website at this moment in time. You will need to email us or drop into the shop to sort out finance. As long as the item is above £250, finance is generally available!
Please note some items are NOT eligible for finance. Please contact us for eligibility first.
Please get in touch with us today to find out if you're applicable.
You must be over 18 years to apply, live in the UK, have a valid UK bank account and not be bankrupt. Your credit file will be searched on application to see if you are eligible.
Rother Valley Optics Ltd is registered in England and Wales 04762707. Registered Office: 21 Station Road, Kiveton Park, Rotherham, S26 6QP. Rother Valley Optics Ltd acts as a credit broker only. Rother Valley Optics Ltd are authorised and regulated by the Financial Conducts Authority. Credit provided subject to age and status..
If you have any questions about this, simply give us a ring or drop into the shop for a chat.
- - - Rother Valley Optics Ltd
01909 774 email@example.com