Altogether 15 pc - in 5 sizes, three rings per size (thickness 0.6/0.8/1.0/1.2/1.4mm) Well suited to tune the rotary position of all kinds of T-2 accessories in approx 90° increments, to move locking screws of eyepiece holders into a comfortable position.
There is often a problem with off-axis systems or folding mirror attachments, where the receptacles of normal eyepieces is just 1-2cm too short to be able to adjust the sharpness level properly.
Eyepiece 1¼ "/ T-2 internal thread priced version with M 4 screw (alternatively: T-2 component # 08A) 1 x M4 clamp screw Telescope side with T-2 internal thread
For locking camera orientation Fits between (almost) any of our T-2 fittings Allows the rotational rotation of flanged accessories, locking in the appropriate position
This very handy accessory converts M48 female into T-2 female thread, it has a male M48 thread (which is also the same thread as Baaders 2" filters) and has a female T-2 thread, this means that it can be screwed onto a T-2 accessory and then offer an M48 thread instead.
M36.4 is standard of Vixen telescopes. Telescope side external thread 36.4mm. Focuser side T-2 external thread (direct T-2 photo thread for Vixen, NexStar 4, Meade etc...).
If you require a 2" to 1.25" adaptor but can't afford the large profile of regular adaptors, then this is the one for you. Once fitted, this adaptor has an optical length of just 1mm, minimizing the optical train length.
This extremely popular 1.25" to T-2 Nosepiece allows you to mount your T-2 accessories or Digital Camera into standard 1.25" focusers or accessories, primarily for prime focus photography.