Home > Telescope Mounts & Tripods > View All Mounts
Model: 1851170Brand: Software Bisque Paramount
Low Stock, Please Confirm Before Ordering
The Paramount MYT has a broad range of exciting features and capabilities that will keep you focused on the stars and not your equipment. Software Bisque urges you to compare the Paramount MYT feature set with every other commercial mount in this price range before buying any mount.
The Paramount MYT (pronounced "mighty") Robotic Telescope Mount is a German equatorial mount designed from the base up to provide unsurpassed stability and performance for portable, semi-portable, or permanent installations. Other than its smaller stature and lower total payload capacity, the Paramount MYT incorporates essentially every feature found in the higher capacity Paramount ME II and Paramount MX+ models.
Portable mount with characteristics of the established ME II and MX+ mountsTwo port USB 2.0 hub on the Instrument Panel4th generation control system, featuring USB 2.0 computer to mount interfaceCalibrated polar alignment adjustments1pc Stainless steel counterweight and stainless steel Counterweight bar23kg total instrument capacityUnibody mount design weights 15kgMaximum 7 arcseconds peak-to-peak periodic error before PECIncludes versatile equipment mounting plate that can accept virtually any equipmentIncludes 80W (48 V / 1.7 A) power supply and cablingBelt driven gears result in virtually zero backlash30 arcsecond or better all sky pointing using T-PointClutchless design maintains your "T-Point assisted" pointing accuracyAll electronics and wiring inside the mount, with space to add additional cabling "through the mount"
Paramount MyTTechnical details:HardwareGerman equatorial mount design.Instrument capacity (not including the counterweights): 50 lb (23 kg). Maximum payload capacity (instruments plus counterweights): 100 lb (46 kg). The purchase of additional counterweights may be required for heavier payloads.Weight of the mount (including the Versa-Plate): 34 lb (15.4 kg)Every Paramount MYT component is custom machined from 6061 aluminum at Software Bisque's production facility.The precision worms are machined from brass.Brass worms and aluminum gears that have a maximum seven (7) arcsecond peak-to-peak periodic error before periodic error correction.When periodic error correction is applied, the resulting peak-to-peak periodic error should be approximately one (1) arcsecond or less.Both the right ascension and declination axes have a simple two position mechanical "switch" to engage the worm during normal operation, disengage the worm from the gear when balancing the payload. A separate knob locks and unlocks each axis for transport.GEM design allows the right ascension axis to track past the meridian for up to 2 hours (time).All internal harnesses (cables) and motors are encapsulated inside the body of the mount.Through the mount access holes allow you to add your own internal cables.Calibrated polar alignment adjustments.Paramount homing, tracking and pointing performance.4.33-inch contact ball bearings in both right ascension and declination.Periodic error correction curve fitting included with TheSkyX Professional Edition.45 arcminute bubble level included.A Paramount-style Versa-Plate for attaching optical tube assemblies is included.Power supply included. Paramount MYT power supply specifications: Max Power Output: 80W, Input: 100-240VAC ~47-63 Hz 1.9A, Output: 48V 1.66A max.One (1) 20 lb (9kg) counterweight included and can balance payloads from about 25-30 pounds. The purchase of additional counterweights may be required for heavier payloads.. Optional 10 lb (4.5 kg) counterweights are sold separately.33 cm (13 in.) long, 3.81 cm (1.5 in.) wide stainless steel counterweight shaft. Thread-compatible with the Paramount Counterweight Extension Shaft.Standard Paramount MYT wedge can be adjusted to reach latitudes from zero (0) degrees to sixty-four (64) degrees.Azimuth axis polar axis adjustment range is plus or minus 3.5 degrees from center position (seven degrees total).Altitude and azimuth polar alignment knobs are calibrated, so that making adjustments using the TPoint Polar Alignment Report is simple and accurate.
Paramount MyTControl System and ElectronicsThe Paramount MYT includes the MKS 5000, Software Bisque's fourth generation dual axis telescope control system.Integrated USB 2.0 computer to mount communication interface can be controlled via TheSkyX Professional Edition on macOS, Windows, Linux (Ubuntu) and Raspbian out of the box.Integrated two port USB 2.0 hub at the camera-end of the telescope, right where USB ports are needed mostThe position of the motors is monitored 3333 times each second to ensure optimal tracking accuracy and smooth, consistent slews at all rates and all times.Tracking and "in progress slews" are immediately stopped in the event the mount's payload encounters a fixed object, such as the side of the pier.The single board control system electronics requires the minimum number of components and has a small physical size.Hand controller features an integrated mini-joystick controller and configurable rate, a five position switch that allows single-handed mount control, an integrated bright red LED flashlight, sturdy "hang anywhere" cable loop and 15-foot coiled hand paddle to mount cable.Programmable periodic error correction with advanced periodic error curve fitting built into TheSkyX Professional Edition.Built-in autoguider port on the Instrument Panel.Built-in focuser port on the Instrument Panel.One 12V and one 5V power port on the Instrument Panel.An integrated through the mount generic "power source" port on the Instrument Panel backed with 18-gauge wire to supply power to your observing equipment.Configurable software limits (using TheSkyX Professional Edition) to ensure the mount does not encounter the pier.Brushless DC servomotors with all moving parts on bearing surfaces. If your mount is used for survey astronomy all night, every clear night, no other type of motor is sufficient. Other commercial mounts use "brushed motors" that don't have nearly the life expectancy of brushless DC servomotors and are not designed to be operated for long periods at the (relatively slow) sidereal rate.DC servomotors provide fast slew speeds and consistent torque at all slew rates.The default maximum slew rate is 5.4 degrees per second. The gear-reducer and worm-block design of the Paramount MYT are extremely efficient so that little power is lost between the motor and the telescope drive. Though good balance is always recommended, the Paramount MYT has no problem slewing or tracking when several foot-pounds out of balance. You'll spend less time fiddling with the telescope and more time acquiring data. If required, slewing and tracking rates of up to six (6) degrees per second in both right ascension axis and declination can be achieved using an optional, higher amperage power supply. An optional, higher wattage power supply is sold separately that can be used to achieve maximum slew rates of up to ten (10) degrees per second.AutoHomeT homing capability (to better than one arcsecond resolution) with built-in sensor circuitry on each axis ensure that the mount always knows its orientation (after an initialization process called "homing"), even after power failure.Configurable park position.Audible feedback that indicates normal operation and error conditions.Slew and tracking rates can be configured with 56-bit precision.The right ascension and declination motors can be rotated at 0 to 4000 revolutions per minute and virtually anywhere in between, providing precise tracking and slewing. This gives you the ability to track on comets, asteroids and even fast- or slow-moving objects such as LEO satellites or any object that moves above or below the sidereal rate.Single-reduced belt-driven worms mean the Paramount MYT has backlash so small it is difficult to measure (typically less than two arcseconds in both axes). Autoguiding calibration is always a snap with this "no-slop" system. Spur gears and other components that may introduce backlash are not used.Temperature compensated internal oscillator with better than 1 part in 10 million that ensures accurate tracking rates over a wide temperature range.Built-in temperature sensor that allows the slew rate to be automatically reduced when the temperature drops.Soft "reboot" capability. This means that the control system can be restarted through software and does not have to be manually turned off, then on.SoftwareThe Paramount MYT comes with the world's best and most powerful astronomy suite of astronomy software developed by the same engineers who designed the software. The Paramount MYT includes:
TheSkyX Professional Edition (Mac, Windows, Linux (Ubuntu) and Raspbian).TPoint Add On (including ProTrack and Super Model ) to TheSkyX Professional Edition.Camera Add On to TheSkyX Professional Edition.Multi-OS and Six License Add On gives you the option to install TheSkyX Pro (and Add Ons) on Mac, Windows, Linux (Ubuntu) and Raspbian, on up to six different computers for each OS.
Be the first to Write a Review for this item!
Some items that are showing as in stock are in stock at our holding warehouses, not at the shop. To double check the stock levels at the shop, please contact us on 01909774369 or firstname.lastname@example.org.
The delivery times for most items is 1 - 2 days but again, please double check stock levels on important orders before placing an order via the website.
The delivery costs for courier next day are for mainland UK only. If you live in the Scottish Highlands/Islands, Channel Islands or Northern Ireland, then a shipping surchage will apply. please contact us for prices. Smaller items can still go 1st class via Royal Mail.
Please note that if you are wanting to take advantage of our Saturday and Sunday timed services or next day pre 12 or pre 10:30 services, you MUST check that the stock is here at the shop before placing orders. Also, orders using the Saturday and Sunday services must be placed before 2pm the previous working day. Also, please remember to check that the stock is here at the shop before placing orders. If the stock is not at the shop, we won't be able to ship on any of the timed services.
Please note International customers will need to contact us for a shipping price prior to ordering via the website. This all depends on the size and weight of the items. Please get in touch with us for any postage costs. Please note we do NOT ship telescopes or heavy items outside of the UK. This is due to massive postage costs and problems regarding returns.
If you have any questions regarding stock levels or delivery, please get in touch.
Rother Valley Optics now have a loyalty point scheme active on the website. As you can see from the products, every item has a point value. Each pound you spend with us, you will receive 1 loyalty point. 1 point is worth 1p. You can accumulate these points as you shop with us, then when you are over £5, you can spend them on the website! Easy as that.
Even if you collect most of your items from our shop, you can still order via the website and select the "shop collection" delivery option. Then you can come to our shop, collect your item and still get your points!
Please note this scheme is online only. Customers who order via the telephone can still be added to the scheme manually. Please ask for more details on this. Before placing orders online, please make sure you are registered with us first otherwise your points won't be allocated.
So happy shopping and if you have any questions about the scheme or any other queries, please get in touch.
Rother Valley Optics
Finance is now available on most products above £250! We offer 12, 24, 36 and 48 months with a fixed 15.9% typical APR. Please note this can't be done through the website at this moment in time. You will need to email us or drop into the shop to sort out finance. As long as the item is above £250, finance is generally available!
Please note some items are NOT eligible for finance. Please contact us for eligibility first.
Please get in touch with us today to find out if you're applicable.
You must be over 18 years to apply, live in the UK, have a valid UK bank account and not be bankrupt. Your credit file will be searched on application to see if you are eligible.
Rother Valley Optics Ltd is registered in England and Wales 04762707. Registered Office: 21 Station Road, Kiveton Park, Rotherham, S26 6QP. Rother Valley Optics Ltd acts as a credit broker only. Rother Valley Optics Ltd are authorised and regulated by the Financial Conducts Authority. Credit provided subject to age and status..
If you have any questions about this, simply give us a ring or drop into the shop for a chat.
- - - Rother Valley Optics Ltd
01909 774 email@example.com
*NameYour name*Contact InformationPlease enter your email address or telephone number here so we can contact you about the price match*URL of competitors websitePlease enter a link here to the item where you have seen it cheaperAdditional InformationAny additional information can be inputted here*Please add the two numbersSubmitSubmit