This handy little DEC adaptor with saddle allows you to attach any accessory fitted with a vixen style bar to the top of your iOptron Skyguider Pro. An option without the saddle is also available.
The line-up of our successful 2" Clicklock eyepiece clamps has been expanded. They replace the basic locking mechanisms of many telescopes. You simply twist it for about 20°, and even heavy accessories are held tightly in place.
The new Sky-Watcher 90° Polar Scope Eyepiece now makes polar aligning your mount so much easier! The eyepiece sleeve securely clamps over the standard polar scope eyepiece using three non-marring, plastic-tipped, knurled metal thumbscrews.
Adapter from M81 to M48 with stop ring for ESATTO 3" allows you to connect any camera or accessory with M48 female thread. Just thread this adapter to the M81 thread of the ESATTO 3" draw tube.
If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you can also connect your Takahashi accessories.
This is a very strong, well built adaptor to convert the finderscope brackets into a handy quick release system. The item is extremely strong and comes with all the hardware needed.
A high quality William Optics 2" Rotolock adaptor with M63 thread to fit directly on the back of the Gran Turismo 71 telescopes. This adaptor will also fit any other telescope with an M63 thread.
The Baader Planetarium 2" Click-Lock Eyepiece Clamp brings eyepiece holders into the 21st century. With a simple twist, 2" eyepieces and accessories are instantly locked with such strength that they can literally support an entire telescope without slippage.
Many H-Alpha imaging configurations suffer from Newton Rings or interference fringes caused by the flat optical surfaces in the imaging train. If the camera is set at an angle to the optical axis the interference pattens can be eliminated.