Products
Collections
Shop by Price
Shop by Brand

Astro-Gadget ScanFi Wi-Fi Adaptor For SynScan GOTO Mounts

Astro-Gadget ScanFi Wi-Fi Adaptor For SynScan GOTO Mounts
  Zoom
Price:  £69.00(Inc. 20% VAT)
+

Model:  95935
Brand:  Astro-Gadget

Availability  

  

Generally In Stock, Please Confirm Before Ordering



2 Year Warranty On All New Items
(Excluding Batteries & Globes)



ScanFi is a wireless adapter for SynScan telescope control systems which are used to control the mounts of SkyWatcher, ORION telescopes.

It can be used for a rapid telescope targeting with help of mobile devices such as smartphones or tablets.

To use the adapter on a PC, you must create a TCP-COM port bridge.

HW Virtual Serial Port software creates a TCP-COM bridge allow Windows based astronomical aplications comunicate throught WIFi moduls.

Compatible with any telescope controlled by SynScan telescope control system.

Important: No external power supply or batteries required to power up this WiFi adapter!

Adapter settings are made from the web interface. It works as an access point and can be used in order to connect all of your astronomy devices into a single network!

Getting started:

Connect your ScanFi WiFi adapter to SynScan RS-232 serial port before power up the telescope;
The RS-232 port (rj12 connector) is located on the bottom of the SynScan handheld controller! Do not plug the adapter into other connectors, this may damage it!

Turn on the power of the telescope. Proceed through the standart installation procedure which recommended by the manufacturer of the telescope: enter the observation coordinates into the remote location, current time and make the telescope alignment by the stars. Connect to SSID «ScanFi» on your mobile device. If device asks for a password during the connection – enter «12345678» and press «OK».
Example of telescope configuration and management with use of SkySafari software:

Download and install the software. In the main menu, go to «Settings»;
Scroll down to «Telescope» section and click on «Setup»;
Select the type of equipment used «Scope Type – SynScan» and type of the mount, depends of your setup «Mount Type – Equatorial Goto (German)» or «Alt-Az. GoTo». In «Communication Settings» section select the wireless connection type – «Connect via WiFi»;
In «IP address» field, enter the IP address that indicated on your ScanFi WiFi adapter – «192.168.2.x»;
In «Port» field, enter – «1234»;
Return to the main menu and press «Connect».
If done correctly, you will hear a pleasant sound and the screen will display a crosshair with concentric circles which indicates the direction of the telescope viewing. On each side there will be the buttons that allow you to move the telescope along the axes of the mount.

You can direct the telescope at the objects by using a SkySafari objects database now. In order to do this use search – «Search» button, select an object from the list and press «GoTo» button. It is also possible to direct the telescope at an object on the screen. You need to click on it first and press «GoTo» after. For more details about how to use all features of the SkySafari software please visit SkySafari official website.

Successful observations and dark sky! Thank you for choosing ScanFi.

Be the first to Write a Review for this item!

Some items that are showing as in stock are in stock at our holding warehouses, not at the shop. To double check the stock levels at the shop, please contact us on 01909774369 or sales@rothervalleyoptics.co.uk.

The delivery times for most items is 1 - 2 days but again, please double check stock levels on important orders before placing an order via the website.

The delivery costs for courier next day are for mainland UK only. If you live in the Scottish Highlands/Islands, Channel Islands or Northern Ireland, then a shipping surchage will apply. please contact us for prices. Smaller items can still go 1st class via Royal Mail.

Please note that if you are wanting to take advantage of our Saturday and Sunday timed services or next day pre 12 or pre 10:30 services, you MUST check that the stock is here at the shop before placing orders. Also, orders using the Saturday and Sunday services must be placed before 1pm the previous working day. Also, please remember to check that the stock is here at the shop before placing orders. If the stock is not at the shop, we won't be able to ship on any of the timed services. 

Please note International customers will need to contact us for a shipping price prior to ordering via the website. We don't ship all items internationally. It is at our discretion what we ship outside of the UK. This all depends on the size and weight of the items. Please get in touch with us for any postage costs. Please note we do NOT ship telescopes or heavy items outside of the UK. This is due to massive postage costs and problems regarding returns.

If you have any questions regarding stock levels or delivery, please get in touch.

Zygo Interferometer Testing For ED Refractor Telescopes!

We are extremely pleased to announce our Zygo Interferometer is now installed and ready for use! Our experienced staff can test refractor lenses up to 120mm aperture and provide a comprehensive 2 page report showing the optical quality and Strehl ratio, plus much more information. We are using the very latest Zygo MX software to provide a more detailed report compared to other standard reports.

 

The interferometer is essentially a measuring instrument. Within the interferometer is a calibrated laser that is pointed through the optical test surface, then onto a high quality reference sphere, then back through the test subject then to an internal camera which gives us the measurement on the screen. From this, we can adjust the position of the test optic and the reference sphere to obtain a perfectly calibrated system. The more central the laser to the test optic and then on return, the better and more accurate reading and measurement we can take. This takes a lot of adjustment to get the best results from the optical surface. Once the measurement has been taken, we are provided with a series of results that show the optical quality of the surface plus other information. Continue reading for an explanation of the individual values and you can also see a test report that was done on one of our RVO Horizon 60 OTAs. 

We are offering certain telescopes with a Zygo test at an extra cost. Mainly ED doublets and triplets. All available telescopes with a Zygo test report are listed here. Just select Zygo Test Report from the drop down box at the top of the listing and we will test the optics in house and provide a full 2 page report with your scope. This will show you the optical quality of your telescope optics. We can also offer this service on your refractor telescope. Please get in touch for more details about this. 

At Rother Valley Optics, one thing we pride ourselves on is customer service and quality of our equipment. When we test your telescope, we will ensure that it is of the highest quality otherwise, we will reject the scope under our strict quality control and test another model for your peace of mind. One of the main values to look at when testing a refractor is the Strehl ratio. The higher this number, the higher quality lens you have. At Rother Valley Optics, we will guarantee the highest possible Strehl ratio for your telescope.  We will aim to provide 0.95 Strehl or higher on Takahashi, RVO Horizon, William Optics and many more! Generally, the higher the Strehl ratio, the lower the Astigmatism and Coma meaning a better image quality from your instrument. 

Other measurements such as the PV and RMS are important too. With these measurements, the lower the number the better as it shows less curvature on the lens. The flatter an optical lens, the better it will perform. The PV rating (Peak To Valley) is a measurement from the highest point (Peak) to the lowest point (Valley). From this we get the RMS (Root, Mean, Square). This is a similar figure to the PV and measured exactly the same way. The RMS is basically an average height difference from the PV so again, the lower the better. As you can see form the example below, we measured an RMS of just 0.027 wave which is a very good value.

We also measure the Power with our systems which is essentially the error from the reference sphere to the test optic. The reference sphere we use on our system is a very high quality sphere so the closer to zero the Power, the less error between the 2 elements thus ensuring a higher quality optical surface. 

You will also see some more values such as Astigmatism and Coma. Again, these are measured by the interferometer when we take measurements of the optical surface after adjustment. These are values which ideally would be at 0 but as our test optics are all curved lenses, there will always be astigmatism and coma present. The lower the number, the less of these aberations you will effectively see but with most refractors, you can buy field flatteners which will compensate for the coma anyway. The astigmatisms value is explaining the error between the symmetrical curvature of the lens. Basically, no lens will be perfectly symmetrical, the lower the astigmatism, the more symmetrical the lens surface is. 

Once the Zygo test report has been completed, the optical alignment is thoroughly tested and tuned to ensure they are spot on before they leave us. 

All available telescopes are on the website at the link below and ones we've tested already that are available straight away are also listed.

https://www.rothervalleyoptics.co.uk/zygo-tested-refractors.html

Here is an example of the test what we provide. This was a test on one of our Horizon 60 ED OTA's.

For any questions about this amazing new service, please either call 01909774369 or email sales@rothervalleyoptics.co.uk.

 


Related Products
Astro-Gadget AuxFi Aux Port Wi-Fi Adaptor For Celestron Telescopes

Astro-Gadget AuxFi Aux Port Wi-Fi Adaptor For Celestron Telescopes£79.00

Astro-Gadget AuxFi connects to the AUX port on the mount and is designed to quickly aim the telescope using mobile devices and PCs.

Astro-Gadget EQDirFi Wi-Fi Adaptor For Skywatcher Mounts

Astro-Gadget EQDirFi Wi-Fi Adaptor For Skywatcher Mounts£69.00

EQDirFi it is a wireless adaptor for direct control of EQUATORIAL GOTO mounts EQ6R-PRO EQ8 HEQ5 AZ-EQ3 AZ-EQ5 AZ-EQ6 Skywatcher and EQ-G ORION.

Astro-Gadget SynFi Wi-Fi Adaptor For Skywatcher NEQ6 Mount

Astro-Gadget SynFi Wi-Fi Adaptor For Skywatcher NEQ6 Mount£69.00

SynFi is a wireless adapter for direct control of EQ mounts of SkyWatcher, Orion telescopes. It can be used for a rapid telescope targeting with help of mobile devices such as smartphones or tablets.