DSLR Buddy v2 is a small device designed for astrophotographers in order to provide constant power supply to DSLR cameras. It also can power up a heater by varying the duty cycle of the DC voltage (PWM control). It is the definitely perfect buddy for your DSLR in the mountains and in any astrophotographic field.
With this dummy battery and the built in Dew Heater Output nothing can stop your camera working for the whole night long! A unique product for time-lapses and astro-photography (deep sky, star trails, etc).
Constant Power Supply to DSLR Camera
Plug the dummy battery to your DSLR and forget to replace the battery every time it drains of power.
Connect a 5- 13.8V power supply to the DSLR buddy and power on your camera with stable and constant voltage for the whole night long!
Either use the DC socket or the USB Micro socket. Use your Power Bank to step up voltage for your camera.
Automatic Voltage Selection
Device automatically and uninterruptibly selects the highest voltage input (DC IN vs USB Micro socket).
Built in Single Channel RCA Dew Heater Output
DSL Buddy has a built in Pulse Width Modulation duty cycle control output for Dew Heater or Flatbox. Able to provide more than 5A of current to your heaters. . Get rid of the moisture on your lens which can ruin your night!
Dew Heater Output works only with DC 2.1mm socket 5-12V Input
Wide range of Battery Couplers
Bundle the DSLRBuddy with a battery coupler for your Sony, Fuji and Canon DSLR / Mirrorless model. Check below page for available battery couplers.
Simple rotary knob control
You can manually dim the Dew Heater output by using the knob at the side of the DSLR Buddy
A red light (PWM duty cycle indicator) change its brightness when you adjust the dew knob.
Reverse Polarity Protection
The device is designed to be protected from reverse voltage polarity. No worries if you accidentally reverse connect your power source.
2 Years warranty
Covers the DSLR Buddy Controller
66 x 66 x 28 mm
Supply Voltage 5-15V DC (Reverse Polarity Protected). 12V DC is preferred
Power Input Connector 2.1mm Centre Positive Socket
USB Micro Socket
DSLR Output 3.5mm Mono Jack (pin is positive), DC 8V
Dew Heater or Flat Output 1 x RCA (5A max current)
Works only when device accepts power from 2.1mm DC Socket
Dimensions 66 mm x 66 mm x 28 mm
In the box
DSLR Buddy Controller
Cigarette Lighter Plug 1.8m length (8A fuse)