This is the latest incarnation of the former Fornax 150/100 mount. The New Fornax 150/100 comes with much strengthened and improved wormbox that makes it an even more precise mount. The new housing of the worm drive is stronger and it has got an extra unit that holds it in exact position, eliminating any sideway movement that could have occured in earlier versions when changing direction under heavy load.
Designed and manufactured in the Europe Union, Fornax Telescope Mounts are a series of German Equatorial mounts for precise positioning and tracking large telescopes. These are available in various payload capacities: 50kg, 100kg, 150kg and 200kg (the latter one is coming soon). There is also a very compact, mobile version called Fornax 10 LighTrack that serves as a lightweight astro photo tracking solution.
The Fornax 150 telescope mount is a heavy duty German Equatorial mount for precise positioning and tracking extremely large telescopes up to about 100kg. Although there are examples of use of even heavier telescopes up to 150kg, the recommended maximum load is about 100kg for this telescope mount when used for imaging.
The mechanism of this extremely sturdy mount is being made of aluminium alloy, cast aluminium, bronze and stainless steel. The worm and the electric motor are located in an enclosed, sealed space (waterproof and dust-proof), making it less sensitive to dust and temperature fluctuations, and is practically maintenance free.
Thanks to the ingenious solution of the inner drive mechanism this telescope mount doesn't suffer from any backlash. Typical periodic error (when not guided) is less than +/- 6 arc seconds (one period on the worm gear is 7.5 minutes long!)
When using a TDM (Telescope Drive Master), this can be reduced to below +/-0.5 arc seconds. (TDM is an alternative solution to guiding.)
When using auto guiding, the mount reacts immediately, so corrections are very fast and completely free of play. This is the ultimate solution for astrophotography with a high quality/price ratio!
Due to its weight and size this model is designed for observatories, not exactly a transportable model!
Recommended maximum telescope weight: 100kg
Overall dimensions: 320 x 420 x 420mm
Shaft diameter: 100mm, anodised aluminium alloy
Bearings: diameter 150mm, high precision tapered roller bearings in X layout
Gear: diameter 292.5mm, 1.5 modul, bronze, 192 teeth
Worm: diameter 33mm, multiple thread, grinded, hardened, corrosion proof steel (KO13)
Periodic Error: < +/- 6 arc seconds
Periodic Error (with TDM): < +/- 0.5 arc seconds
Stepper Motors: 200-phase step / rev., 1.7Nm
Voltage and Current: 24V DC, 3.5A peak power consumption at max. load
Counterbalance holder tube: diameter 42.4mm (1.25" KO33 tube) x length 570mm
Step-resolution: 0.5 arc seconds / step
Maximum speed: 4 degrees / second